Ручной расчёт установившегося режима сети с двухсторонним питанием

Материал из Wiki Power System
Версия от 20:11, 23 июня 2020; Windsl (обсуждение | вклад) (Расчет потокораспределения без учета потерь мощности методом контурных уравнений)
Перейти к: навигация, поиск

В статье приведено описание метода ручного расчёта сложно-замкнутой электрической сети с двухсторонним питанием.

Теоретические основы

Алгоритм расчёта сети с двухсторонним питанием:

  1. Составление схемы замещения.
  2. Выбор условно-положительного направления мощностей.
  3. Приравнивание напряжений базисных узлов.
  4. Расчет сети без учета потерь мощности.
  5. Расчет уравнительного перетока между базисными узлами.
  6. Наложение уравнительного перетока на результаты расчета п. 4.
  7. Нахождение точек потокораздела (при необходимости).
  8. Расчет полученной разветвленной сети с потерями мощности.
  9. Расчёт уравнительных перетоков в узлах потокораздела.
  10. Уточнить мощности шунтов, в соответствие с новыми уровнями напряжений.
  11. Повторять с пункта 8 до достижения критерия остановки итерационного процесса.

Пример расчёта сложно-замкнутой электрической сети с двухсторонним питанием

Задание

Основные задачи расчёта:

  1. Выполнить расчёт распределения потоков мощностей с учётом потерь мощности.

Исходные данные

Рисунок 1. Исходная схема электрической сети.
  1. Исходная схема электрической сети представлена на рисунке 1.
  2. Мощности нагрузок узлов:
    • [math]\displaystyle \dot S_{1}=40+j20 \text{ МВА }; [/math]
    • [math]\displaystyle \dot S_{2}=-80-j40 \text{ МВА }; [/math]
    • [math]\displaystyle \dot S_{3}=50+j25 \text{ МВА }; [/math]
    • [math]\displaystyle \dot S_{4}=30+j15 \text{ МВА }; [/math]
    • [math]\displaystyle \dot S_{5}=-20-j10 \text{ МВА }; [/math]
  3. Напряжения базисных узлов:[math]\displaystyle \dot{U}_{\text{А}} = 115 \angle 0^\circ [/math] кВ, [math]\displaystyle \dot{U}_{\text{B}}=110 \angle - 2^\circ [/math] кВ.
  4. Марка проводов ЛЭП:
    • A-1: АС-240, 40 км;
    • B-3: АС-240, 20 км;
    • 1-2: АС-240, 20 км;
    • 1-3: АС-240, 30 км;
    • 1-4: АС-240, 40 км;
    • 2-3: АС-240, 20 км;
    • 3-5: АС-240, 30 км;
    • 4-5: АС-240, 10 км.

Решение

Расчет параметров схемы замещения

Рисунок 2. Схема замещения исходной электрической сети.

Схема замещения сети и её параметров, приведена на рисунке 2. Расчет параметров для ЛЭП выполнен на основе справочных данных параметров ЛЭП

ЛЭП A-1:

[math]\displaystyle \underline Z_{A-1}=\frac {R_{0} \cdot L_{A-1}}{100}+\frac {X_{0} \cdot L_{A-1}}{100} = \frac {0,12 \cdot 40}{100}+\frac {0,405 \cdot 40}{100} = 4,8+j16,2 [/math] Ом;
[math]\displaystyle \underline Y_{A-1}= j \frac {B_{0} \cdot L_{A-1}}{100} = j \frac {2,81 \cdot 40}{100}= j112,4 [/math] мкСм.

ЛЭП B-3:

[math]\displaystyle \underline Z_{B-3}=\frac {R_{0} \cdot L_{B-3}}{100}+\frac {X_{0} \cdot L_{B-3}}{100} = \frac {0,12 \cdot 20}{100}+\frac {0,405 \cdot 20}{100} = 2,4+j8,1 [/math] Ом;
[math]\displaystyle \underline Y_{B-3}= j \frac {B_{0} \cdot L_{B-3}}{100} = j \frac {2,81 \cdot 20}{100}= j56,2 [/math] мкСм.


ЛЭП 1-2:

[math]\displaystyle \underline Z_{1-2}=\frac {R_{0} \cdot L_{1-2}}{100}+\frac {X_{0} \cdot L_{1-2}}{100} = \frac {0,12 \cdot 20}{100}+\frac {0,405 \cdot 20}{100} = 2,4+j8,1 [/math] Ом;
[math]\displaystyle \underline Y_{1-2}= j \frac {B_{0} \cdot L_{1-2}}{100} = j \frac {2,81 \cdot 20}{100}= j56,2 [/math] мкСм.

ЛЭП 1-3:

[math]\displaystyle \underline Z_{1-3}=\frac {R_{0} \cdot L_{1-3}}{100}+\frac {X_{0} \cdot L_{1-3}}{100} = \frac {0,12 \cdot 30}{100}+\frac {0,405 \cdot 30}{100} = 3,6+j12,15 [/math] Ом;
[math]\displaystyle \underline Y_{1-3}= j \frac {B_{0} \cdot L_{1-3}}{100} = j \frac {2,81 \cdot 30}{100}= j84,3 [/math] мкСм.

ЛЭП 1-4:

[math]\displaystyle \underline Z_{1-4}=\frac {R_{0} \cdot L_{1-4}}{100}+\frac {X_{0} \cdot L_{1-4}}{100} = \frac {0,12 \cdot 40}{100}+\frac {0,405 \cdot 40}{100} = 4,8+j16,2 [/math] Ом;
[math]\displaystyle \underline Y_{1-4}= j \frac {B_{0} \cdot L_{1-4}}{100} = j \frac {2,81 \cdot 40}{100}= j112,4 [/math] мкСм.

ЛЭП 2-3:

[math]\displaystyle \underline Z_{2-3}=\frac {R_{0} \cdot L_{2-3}}{100}+\frac {X_{0} \cdot L_{2-3}}{100} = \frac {0,12 \cdot 20}{100}+\frac {0,405 \cdot 20}{100} = 2,4+j8,1 [/math] Ом;
[math]\displaystyle \underline Y_{2-3}= j \frac {B_{0} \cdot L_{2-3}}{100} = j \frac {2,81 \cdot 20}{100}= j56,2 [/math] мкСм.

ЛЭП 3-5:

[math]\displaystyle \underline Z_{3-5}=\frac {R_{0} \cdot L_{3-5}}{100}+\frac {X_{0} \cdot L_{3-5}}{100} = \frac {0,12 \cdot 30}{100}+\frac {0,405 \cdot 30}{100} = 3,6+j12,15 [/math] Ом;
[math]\displaystyle \underline Y_{3-5}= j \frac {B_{0} \cdot L_{3-5}}{100} = j \frac {2,81 \cdot 30}{100}= j84,3 [/math] мкСм.

ЛЭП 4-5:

[math]\displaystyle \underline Z_{4-5}=\frac {R_{0} \cdot L_{4-5}}{100}+\frac {X_{0} \cdot L_{4-5}}{100} = \frac {0,12 \cdot 10}{100}+\frac {0,405 \cdot 10}{100} = 1,2+j4,05 [/math] Ом;
[math]\displaystyle \underline Y_{4-5}= j \frac {B_{0} \cdot L_{4-5}}{100} = j \frac {2,81 \cdot 10}{100}= j28,1 [/math] мкСм.

Расчет потокораспределения без учета потерь мощности методом контурных уравнений

Приравняем напряжения базисных узлов и получим схему, предствленную на рисунке 3.

Рисунок 3. Схема для расчета методом контурных уравнений.

Синим цветом выделены контурные потоки мощности. Зеленым цветом веделено дерево графа схемы. Контур I — A1,13,B3; контур II — 12, 23, 13; контур III — 13, 35, 45, 14.

Контурные (хордовые) перетоки мощности:

[math] \left\{ \begin{matrix} \dot S_{B-3} = \dot S_{I}\\ \dot S_{2-3} = \dot S_{II} \\ \dot S_{3-5} = \dot S_{III} \end{matrix} \right. [/math]

Собственные сопротивления контуров:

[math]\displaystyle \underline Z_{I-I} = \underline Z_{A-1} + \underline Z_{B-3} + \underline Z_{1-3} = 4,8 + j16,2 + 2,4 + j8,1 + 3,6 + j12,15 = 10,8 + j36,45[/math] Ом;
[math]\displaystyle \underline Z_{II-II} = \underline Z_{1-2} + \underline Z_{2-3} + \underline Z_{1-3} = 2,4 + j8,1 + 2,4 + j8,1 + 3,6 + j12,15 = 8,4 + j28,35[/math] Ом;
[math]\displaystyle \underline Z_{III-III} = \underline Z_{1-3} + \underline Z_{1-4} + \underline Z_{4-5}+\underline Z_{3-5} = 3,6 + j12,15 + 4,8 + j16,2 + 1,2 + j4,05 + 3,6 + j12,15 = 13,2 + j44,55[/math] Ом.

Смежные сопротивления контуров:

Так как все контура между собой соприкасаются по ветви 13, то:
[math]\displaystyle \underline Z_{I-II}=\underline Z_{II-I}=\underline Z_{I-III}=\underline Z_{III-I}=\underline Z_{II-III}=\underline Z_{III-II}=\underline Z_{1-3}=3,6+j12,15[/math] Ом.

Свободные слагаемые:

[math]\displaystyle С_{I}=- \dot S_{1}\cdot\hat Z_{A-1}-\dot S_{2}\cdot\hat Z_{A-1}-\dot S_{3}\cdot(\hat Z_{A-1}+ \hat Z_{1-3})-\dot S_{4}\cdot\hat Z_{A-1}-\dot S_{5}\cdot\hat Z_{A-1}[/math];
[math]\displaystyle С_{I}=-(40+j20)\cdot(4,8-16,2)-(-80-j40)\cdot(4,8-j16,2)-(50+j25)\cdot(4,8-j16,2+3,6-j12,15)-(30+j15)\cdot(4,8-j16,2)-(-20-j10)\cdot(4,8-j16,2)[/math];
[math]\displaystyle С_{I}=-741,75+j793,5[/math];
[math]\displaystyle С_{II}=\dot S_{2}\cdot\hat Z_{1-2}-\dot S_{3}\cdot\hat Z_{1-3}=(-80-j40)\cdot(2,4-8,1)-(50+j25)\cdot(3,6-j12,15)=-999,75+j1069,5[/math];
[math]\displaystyle С_{III}=-\dot S_{3}\cdot\hat Z_{1-3}+\dot S_{4}\cdot\hat Z_{1-4}+\dot S_{5}\cdot(\hat Z_{1-4}+\hat Z_{4-5})=-(50+j25)\cdot(3,6-12,15)+(30+j15)\cdot(4,8-j16,2)+(-20-j10)\cdot(4,8-j16,2+1,2-j4,05)[/math];
[math]\displaystyle С_{III}=-419,25+j448,5[/math].

Контурные уравнения:

[math]\displaystyle \left\{ \begin{matrix} \dot S_{I}\cdot\hat Z_{I-I}+\dot S_{II}\cdot\hat Z_{I-II}+\dot S_{III}\cdot\hat Z_{I-III}+ С_{I}=0\\ \dot S_{I}\cdot\hat Z_{II-I}+\dot S_{II}\cdot\hat Z_{II-II}+\dot S_{III}\cdot\hat Z_{II-III}+ С_{II}=0 \\ \dot S_{I}\cdot\hat Z_{III-I}+\dot S_{II}\cdot\hat Z_{III-II}+\dot S_{III}\cdot\hat Z_{III-III}+ С_{III}=0 \end{matrix} \right. [/math]

Решив данную СЛАУ [1] имеем:

[math]\displaystyle \left\{ \begin{matrix} \dot S_{I}=13,175+j6,587 \text{ МВА }\\ \dot S_{II}=39,762+19,881 \text{ МВА } \\ \dot S_{III}=-2,619-j1,31 \text{ МВА } \end{matrix} \right. [/math]

Перетоки мощности в остальных ветвях:

[math]\displaystyle \dot S_{1-3}=-\dot S_{3}+\dot S_{I}+\dot S_{II}+\dot S_{III}=-(50+j25)+13,175+j6,587+39,762+j19,881+(-2,619-j1,31)=0,317+j0,159 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4-5}=-\dot S_{5}-\dot S_{III}=-(-20-j10)-(-2,619-j1,31)=22,619+j11,31 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1-4}=-\dot S_{4-5}+\dot S_{4}=-(22,619+j11,31)+30+j15=7,381+j3,69 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1-2}=-\dot S_{II}-\dot S_{2}=-(39,762+j19,881)-(-80-j40)=40,238+j20,119 \text{ МВА }[/math];
[math]\displaystyle \dot S_{A-1}=\dot S_{1}+\dot S_{1-4}-\dot S_{1-2}-\dot S_{1-3}=40+j20+7,381+j3,69-(40,238+j20,119)-(0,317+j0,159)=6,825+j3,413 \text{ МВА }[/math].

Расчет уравнительного перетока мощности между базами

Рисунок 4. Уравнительный переток мощности между базами.

Схема с уравнительным перетоком мощности изображена на рисунке 4.

Эквивалентные сопротивления:

[math] \displaystyle\underline Z_{ЭКВ}=\frac{\underline Z_{1-3}\cdot(\underline Z_{1-2}+\underline Z_{2-3})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}{\underline Z_{1-3}\cdot(\underline Z_{1-2}+\underline Z_{2-3})+\underline Z_{1-3}\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})+(\underline Z_{1-2}+\underline Z_{2-3})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}[/math];
[math] \displaystyle \underline Z_{1-2}+\underline Z_{2-3}=2,4+j8,1+2,4+j8,1=4,8+j16,2\text{ Ом }[/math];
[math] \displaystyle \underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5}=4,8+j16,2+1,2+j4,05+3,6+j12,15=9,6+j32,4\text{ Ом }[/math];
[math] \displaystyle\underline Z_{ЭКВ}=\frac{(3,6+j12,15)\cdot(4,8+j16,2)\cdot(9,6+j32,4)}{(3,6+j12,15)\cdot(4,8+j16,2)+(3,6+j12,15)\cdot(9,6+j32,4)+(4,8+j16,2)\cdot(9,6+j32,4)}=1,694+j5,718\text{ Ом }[/math];
[math] \displaystyle\underline Z_{A-B}=\underline Z_{A-1}+\underline Z_{ЭКВ}+\underline Z_{B-3}=4,8+j16,2+1,694+j5,718+2,4+j8,1=8,894+j30,018\text{ Ом }[/math].

Уравнительный переток:

[math]\displaystyle \dot S_{урA-B}= \frac{\dot U_{A}+\dot U_{B}}{2}\cdot \frac{\hat{\dot U_{A}}-\hat{\dot U_{B}}}{\hat Z_{A-B}}=\frac{115 \angle 0^\circ + 110 \angle - 2^\circ}{2}\cdot \frac{115 \angle 0^\circ -110 \angle - 2^\circ}{8,894-j30,018}=18,625+j13,221\text{ МВА }[/math].

Уравнительный переток распределяется по ветвям пропорционально сопротивлениям:

[math]\displaystyle \dot S_{ур1-3}= \dot S_{урA-B}\cdot\frac{\hat Z_{ЭКВ}}{\hat Z_{1-3}}=(18,625+j13,221)\cdot\frac{1,694-j5,718}{3,6-j12,15}=8,764+j6,221\text{ МВА }[/math];
[math]\displaystyle \dot S_{ур1-2-3}= \dot S_{урA-B}\cdot\frac{\hat Z_{ЭКВ}}{\hat Z_{1-2}+\hat Z_{2-3}}=(18,625+j13,221)\cdot\frac{1,694-j5,718}{4,8-j16,2}=6,573+j4,666\text{ МВА }[/math];
[math]\displaystyle \dot S_{ур1-4-5-3}= \dot S_{урA-B}\cdot\frac{\hat Z_{ЭКВ}}{\hat Z_{1-4}+\hat Z_{4-5}+\hat Z_{3-5}}=(18,625+j13,221)\cdot\frac{1,694-j5,718}{9,6-j32,4}=3,287+j2,333\text{ МВА }[/math].

Перетоки мощности в ветвях с учетом уравнительного перетока:

[math]\displaystyle \dot S_{A-1}=\dot S_{A-1}+\dot S_{урA-B}=6,825+j3,413+18,625+j13,221=25,45+j16,633 \text{ МВА }[/math];
[math]\displaystyle \dot S_{B-3}=\dot S_{B-3}-\dot S_{урA-B}=13,175+j6,587-(18,625+j13,221)=-5,45-j6,633 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1-2}=\dot S_{1-2}-\dot S_{ур1-2-3}=40,238+j20,119-(6,573+j4,666)=33,665+j15,453 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1-3}=\dot S_{1-3}-\dot S_{ур1-3}=0,317+j0,159-(8,764+j6,221)=-8,447-j6,063 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1-4}=\dot S_{1-4}+\dot S_{ур1-4-5-3}=7,381+j3,69+3,287+j2,333=10,668+j6,024 \text{ МВА }[/math];
[math]\displaystyle \dot S_{2-3}=\dot S_{2-3}+\dot S_{ур1-2-3}=39,762+j19,881+6,573+j4,666=46,335+j24,547 \text{ МВА }[/math];
[math]\displaystyle \dot S_{3-5}=\dot S_{3-5}+\dot S_{ур1-4-5-3}=-2,619-j1,31+3,287+j2,333=0,668+j1,024 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4-5}=\dot S_{4-5}-\dot S_{ур1-4-5-3}=22,619+j11,31-(3,287+j2,333)=19,332+j8,976 \text{ МВА }[/math].

Расчет разветвленной сети с учетом потерь мощности

Рисунок 5. Расчетная схема сети.

Пусть точки потокораздела — узлы 1, 2, 4. Расчетная схема представлена на рисунке 5.

Начальные приближения

[math]\displaystyle \dot{U_{1′}}=110 \angle - 2^\circ [/math] кВ;
[math]\displaystyle \dot{U_{1′′}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{2′}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{2′′}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{3}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{4′}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{4′′}}=115 \angle 0^\circ[/math] кВ;
[math]\displaystyle \dot{U_{5}}=115 \angle 0^\circ[/math] кВ.

Расчет потерь мощности в шунтах

[math]\displaystyle \dot{ΔS_{ш1′}}=\dot {|U_{1′}|}^{2}\cdot \frac {\hat Y_{A-1}}{2}={110}^{2}\cdot \frac {-j112,4}{2}\cdot 10^{-6}=-j0,68 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш1′′}}=\dot {|U_{1′′}|}^{2}\cdot \left( \frac {\hat Y_{1-2}}{2}+\frac {\hat Y_{1-3}}{2}+\frac {\hat Y_{1-4}}{2} \right)={115}^{2}\cdot \left( \frac {-j56,2}{2}+\frac {-j84,3}{2}+\frac {-j112,4}{2}\right)\cdot 10^{-6}=-j1,672 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш2′}}=\dot {|U_{2′}|}^{2}\cdot \frac {\hat Y_{1-2}}{2}={115}^{2}\cdot \frac {-j56,2}{2}\cdot 10^{-6}=-j0,372 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш2′′}}=\dot {|U_{2′′}|}^{2}\cdot \frac {\hat Y_{2-3}}{2}={115}^{2}\cdot \frac {-j56,2}{2}\cdot 10^{-6}=-j0,372 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш3}}=\dot {|U_{3}|}^{2}\cdot\left( \frac {\hat Y_{1-3}}{2}+\frac {\hat Y_{B-3}}{2}+\frac {\hat Y_{3-5}}{2}\frac {\hat Y_{2-3}}{2}\right)={115}^{2}\cdot \left( \frac {-j84,3}{2}+\frac {-j56,2}{2}+\frac {-j84,3}{2}+\frac {-j56,2}{2}\right)\cdot 10^{-6}=-j1,858 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш4′}}=\dot {|U_{4′}|}^{2}\cdot \frac {\hat Y_{1-4}}{2}={115}^{2}\cdot \frac {-j112,4}{2}\cdot 10^{-6}=-j0,743 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш4′′}}=\dot {|U_{4′′}|}^{2}\cdot \frac {\hat Y_{4-5}}{2}={115}^{2}\cdot \frac {-j28,1}{2}\cdot 10^{-6}=-j0,186 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш5}}=\dot {|U_{5}|}^{2}\cdot\left( \frac {\hat Y_{4-5}}{2}+\frac {\hat Y_{3-5}}{2}\right)={115}^{2}\cdot \left( \frac {-j28,1}{2}+\frac {-j84,3}{2}\right)\cdot 10^{-6}=-j0,743 \text{ МВА } [/math].

Расчет узловых мощностей

[math]\displaystyle \dot S_{1′}=\dot S_{A-1}=25,45+j16,633 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1′′}=\dot S_{1-2}+\dot S_{1-3}-\dot S_{1-4}=33,665+j15,453+(-8,447-j6,063)-(10,668+j6,024)=14,55+j3,367 \text{ МВА }[/math];
[math]\displaystyle \dot S_{2′}=-\dot S_{1-2}=-33,665-j15,453 \text{ МВА }[/math];
[math]\displaystyle \dot S_{2′′}=-\dot S_{2-3}=-46,335-j24,547 \text{ МВА }[/math];
[math]\displaystyle \dot S_{3}=50+j25 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4′}=\dot S_{1-4}=10,668+j6,024 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4′′}=\dot S_{4-5}=19,332+j8,976 \text{ МВА }[/math];
[math]\displaystyle \dot S_{5}=-20-j10 \text{ МВА }[/math].

Прямой ход по мощностям

[math]\displaystyle \dot {S}_{1′Aк}=\dot{S}_{1′}+\Delta \dot S_{ш1′} = 25,45+j16,633+(-j0,68)=25,45+j15,953 \text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{1′A} = \frac{P_{1′Aк}^{2}+Q_{1′Aк}^{2}}{|\dot U_{1′}|^{2}}\cdot \underline{Z}_{A-1} = \frac{25,45^{2}+15,953^{2}}{110^{2}}\cdot (4,8+j16,2) = 0,358+j1,208\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′Aн}=\dot{S}_{1′Aк}+\Delta \dot{S}_{1′A}=25,45+j15,953+0,358+j1,208=25,808+j17,161 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′4′к}=\dot{S}_{4′}+\Delta \dot S_{ш4′} = 10,668+j6,024+(-j0,743)=10,668+j5,28 \text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{1′′4′} = \frac{P_{1′′4′к}^{2}+Q_{1′′4′к}^{2}}{|\dot U_{4′}|^{2}}\cdot \underline{Z}_{1-4} = \frac{10,668^{2}+5,28^{2}}{115^{2}}\cdot (4,8+j16,2) = 0,051+j0,174 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′4′н}=\dot{S}_{1′′4′к}+\Delta \dot{S}_{1′′4′}=10,668+j5,28+0,051+j0,174=10,719+j5,454\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′2′к}=-\dot{S}_{2′}-\Delta \dot S_{ш2′} =-(-33,665-j15,453)-(-j0,372)=33,665+j15,825\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{1′′2′} = \frac{P_{1′′2′к}^{2}+Q_{1′′2′к}^{2}}{|\dot U_{2′}|^{2}}\cdot \underline{Z}_{1-2} = \frac{33,665^{2}+15,825^{2}}{115^{2}}\cdot (2,4+j8,1) = 0,251+j0,848 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′2′н}=\dot{S}_{1′′2′к}-\Delta \dot S_{1′′2′}=33,665+j15,825-(0,251+j0,848)=33,414+j14,977\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′3к}=\dot{S}_{1′′}+\dot{S}_{1′′4′н}-\dot {S}_{1′′2′н}+\Delta \dot S_{ш1′′}=14,55+j3,367+10,719+j5,454-(33,414+j14,977)+(-j1,672)=-8,144-j7,829\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{1′′3} = \frac{P_{1′′3к}^{2}+Q_{1′′3к}^{2}}{|\dot U_{1′′}|^{2}}\cdot \underline{Z}_{1-3} = \frac{(-8,144)^{2}+(-j7,829)^{2}}{115^{2}}\cdot (3,6+j12,15) = 0,035+j0,117 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{1′′3н}=\dot{S}_{1′′3к}+\Delta \dot S_{1′′3}=-8,144-j7,829+0,035+j0,117=-8,11-j7,712\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{2′′3к}=-\dot{S}_{2′′}-\Delta \dot S_{ш2′′}=-(-46,335-j24,547)-(-j0,372)=46,335+j24,919\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{2′′3} = \frac{P_{2′′3к}^{2}+Q_{2′′3к}^{2}}{|\dot U_{2′′}|^{2}}\cdot \underline{Z}_{2-3} = \frac{46,335^{2}+24,919^{2}}{115^{2}}\cdot (2,4+j8,1) = 0,502+j1,695 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{2′′3н}=\dot{S}_{2′′3к}-\Delta \dot S_{2′′3}=46,335+j24,919-(0,502+j1,695)=45,833+j23,223\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{4′′5к}=\dot{S}_{4′′}+\Delta \dot S_{ш4′′}=19,332+j8,976+(-j0,186)=19,332+j8,791\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{4′′5} = \frac{P_{4′′5к}^{2}+Q_{4′′5к}^{2}}{|\dot U_{4′′}|^{2}}\cdot \underline{Z}_{4-5} = \frac{19,332^{2}+8,791^{2}}{115^{2}}\cdot (1,2+j4,05) = 0,041+j0,138 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{4′′5н}=\dot{S}_{4′′5к}+\Delta \dot S_{4′′5}=19,332+j8,791+0,041+j0,138=19,373+j8,929\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{35к}=-\dot{S}_{4′′5н}-\dot{S}_{5}-\Delta \dot S_{ш5}=-(19,373+j8,929)-(-20-j10)-(-j0,743)=0,627+j1,814\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{35} = \frac{P_{35к}^{2}+Q_{35к}^{2}}{|\dot U_{5}|^{2}}\cdot \underline{Z}_{3-5} = \frac{0,627^{2}+1,814^{2}}{115^{2}}\cdot (3,6+j12,15) = 1,003\cdot 10^{-3}+3,385i\cdot 10^{-3} \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{35н}=\dot{S}_{35к}-\dot{S}_{35}=0,627+j1,814-(1,003\cdot 10^{-3}+3,385i\cdot 10^{-3})=0,626+j1,811\text{ МВА }[/math];
[math]\displaystyle \dot {S}_{B3к}=-\dot{S}_{1′′3н}-\dot{S}_{35н}-\dot{S}_{2′′3н}+\dot{S}_{3}+\Delta \dot S_{ш3}=-8,11-j7,712-(0,626+j1,811)-(45,833+j23,223)+50+j25+(-j1,858)=-4,568-j9,604\text{ МВА }[/math];
[math]\displaystyle \Delta \dot{S}_{B3} = \frac{P_{B3к}^{2}+Q_{B3к}^{2}}{|\dot U_{3}|^{2}}\cdot \underline{Z}_{B-3} = \frac{(-4,568)^{2}+(-9,604)^{2}}{115^{2}}\cdot (2,4+j8,1) = 0,021+j0,069 \text{ МВА }[/math];
[math]\displaystyle \dot {S}_{B3н}=\dot{S}_{B3к}+\Delta \dot{S}_{B3}=-4,568-j9,604+0,021+j0,069=-4,548-j9,535\text{ МВА }[/math].


Обратный ход по напряжениям

[math]\displaystyle \Delta \dot{U}_{1′A} = \frac{P_{1′Aн}\cdot R_{A-1}+Q_{1′Aн}\cdot X_{A-1}}{|\dot U_{A}|} = \frac{25,808\cdot 4,8+17,161\cdot 16,2}{115} = 3,495[/math] кВ;
[math]\displaystyle \delta \dot{U}_{1′A} = \frac{P_{1′A}\cdot X_{A-1}-Q_{1′A}\cdot R_{A-1}}{|\dot U_{A}|} = \frac{25,808\cdot 16,2-17,161\cdot 4,8}{115} = 2,919[/math] кВ;
[math]\displaystyle \dot U_{1′}=|\dot U_{A}|-\Delta U_{1′A} - j\delta U_{1′A}=115-3,495-j2,919=111,544\angle -1,5^\circ[/math] кВ;
[math]\displaystyle \Delta \dot{U}_{B3} = \frac{P_{B3н}\cdot R_{B-3}+Q_{B3н}\cdot X_{B-3}}{|\dot U_{B}|} = \frac{-4,548\cdot 2,4+(-9,535)\cdot 8,1}{110} = -0,801[/math] кВ;
[math]\displaystyle \delta \dot{U}_{1′A} = \frac{P_{B3н}\cdot X_{B-3}-Q_{B3н}\cdot R_{B-3}}{|\dot U_{B}|} = \frac{-4,548\cdot 8,1-(-9,535)\cdot 2,4}{110} = -0,127[/math] кВ;
[math]\displaystyle \dot U_{3}=|\dot U_{B}|-\Delta U_{B3} - j\delta U_{B3}=110-(-0,801)-(-j0,127)=110,801\angle 0,066^\circ[/math] кВ;
[math]\displaystyle {\phi}_{3}=\angle 0,066^\circ-\angle 2^\circ=\angle -1,934^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{2′′3} = \frac{P_{2′′3н}\cdot R_{2-3}+Q_{2′′3н}\cdot X_{2-3}}{|\dot U_{3}|} = \frac{45,833\cdot 2,4+23,223\cdot 8,1}{110,801} = 2,69[/math] кВ;
[math]\displaystyle \delta \dot{U}_{2′′3} = \frac{P_{2′′3н}\cdot X_{2-3}-Q_{2′′3н}\cdot R_{2-3}}{|\dot U_{3}|} = \frac{45,833\cdot 8,1-23,223\cdot 2,4}{110,801} = 2,848[/math] кВ;
[math]\displaystyle \dot U_{2′′}=|\dot U_{3}|+\Delta U_{2′′3}+j\delta U_{2′′3}=110,801+2,69+j2,848=113,528\angle 1,437^\circ[/math] кВ;
[math]\displaystyle {\phi}_{2′′}=\angle 1,437^\circ-\angle 2^\circ=\angle -0,563^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{35} = \frac{P_{35н}\cdot R_{3-5}+Q_{35н}\cdot X_{3-5}}{|\dot U_{3}|} = \frac{0,626\cdot 3,6+1,811\cdot 12,15}{110,801} = 0,219[/math] кВ;
[math]\displaystyle \delta \dot{U}_{35} = \frac{P_{35н}\cdot X_{3-5}-Q_{35н}\cdot R_{3-5}}{|\dot U_{3}|} = \frac{0,626\cdot 12,15-1,811\cdot 3,6}{110,801} = 9,769\cdot 10^{-3}[/math] кВ;
[math]\displaystyle \dot U_{5}=|\dot U_{3}|+\Delta U_{35}+j\delta U_{35}=110,801+0,219+j9,769\cdot 10^{-3}=111,02\angle 5,042\cdot 10^{-3\circ}[/math] кВ;
[math]\displaystyle {\phi}_{5}=\angle 5,042\cdot 10^{-3\circ}-\angle 2^\circ=\angle -1,995^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{4′′5} = \frac{P_{4′′5н}\cdot R_{4-5}+Q_{4′′5н}\cdot X_{4-5}}{|\dot U_{5}|} = \frac{19,373\cdot 1,2+8,929\cdot 4,05}{111,02} = 0,535[/math] кВ;
[math]\displaystyle \delta \dot{U}_{4′′5} = \frac{P_{4′′5н}\cdot X_{4-5}-Q_{4′′5н}\cdot R_{4-5}}{|\dot U_{5}|} = \frac{19,373\cdot 4,05-8,929\cdot 1,2}{111,02} = 0,61[/math] кВ;
[math]\displaystyle \dot U_{4′′}=|\dot U_{5}|-\Delta U_{4′′5}-j\delta U_{4′′5}=111,02-0,535-j0,61=110,487\angle -0,316^\circ[/math] кВ;
[math]\displaystyle {\phi}_{4′′}=\angle -0,316^\circ-\angle 2^\circ=\angle -2,316^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{1′′3} = \frac{P_{1′′3н}\cdot R_{1-3}+Q_{1′′3н}\cdot X_{1-3}}{|\dot U_{3}|} = \frac{-8,11\cdot 3,6+(-7,712)\cdot 12,15}{110,801} = -1,109[/math] кВ;
[math]\displaystyle \delta \dot{U}_{1′′3} = \frac{P_{1′′3н}\cdot X_{1-3}-Q_{1′′3н}\cdot R_{1-3}}{|\dot U_{3}|} = \frac{-8,11\cdot 12,15-(-7,712)\cdot 3,6}{110,801} = -0,639[/math] кВ;
[math]\displaystyle \dot U_{1′′}=|\dot U_{3}|-\Delta U_{1′′3}-j\delta U_{1′′3}=110,801-(-1,109)-(-j0,639)=111,912\angle 0,327^\circ[/math] кВ;
[math]\displaystyle {\phi}_{1′′}=\angle 0,327^\circ-\angle 2^\circ=\angle -1,673^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{1′′2′} = \frac{P_{1′′2′н}\cdot R_{1-2}+Q_{1′′2′н}\cdot X_{1-2}}{|\dot U_{1′′}|} = \frac{33,414\cdot 2,4+14,977\cdot 8,1}{111,912} = 1,801[/math] кВ;
[math]\displaystyle \delta \dot{U}_{1′′2′} = \frac{P_{1′′2′н}\cdot X_{1-2}-Q_{1′′2′н}\cdot R_{1-2}}{|\dot U_{1′′}|} = \frac{33,414\cdot 8,1-14,977\cdot 2,4}{111,912} = 2,097[/math] кВ;
[math]\displaystyle \dot U_{2′}=|\dot U_{1′′}|+\Delta U_{1′′2′}+j\delta U_{1′′2′}=111,912+1,801+j2,097=113,732\angle 1,057^\circ[/math] кВ;
[math]\displaystyle {\phi}_{2′}=\angle 1,057^\circ-\angle 2^\circ=\angle -0,943^\circ[/math];
[math]\displaystyle \Delta \dot{U}_{1′′4′} = \frac{P_{1′′4′н}\cdot R_{1-4}+Q_{1′′4′н}\cdot X_{1-4}}{|\dot U_{1′′}|} = \frac{10,719\cdot 4,8+5,454\cdot 16,2}{111,912} = 1,249[/math] кВ;
[math]\displaystyle \delta \dot{U}_{1′′4′} = \frac{P_{1′′4′н}\cdot X_{1-4}-Q_{1′′4′н}\cdot R_{1-4}}{|\dot U_{1′′}|} = \frac{10,719\cdot 16,2-5,454\cdot 4,8}{111,912} = 1,318[/math] кВ;
[math]\displaystyle \dot U_{4′}=|\dot U_{1′′}|-\Delta U_{1′′4′}-j\delta U_{1′′4′}=111,912-1,249-j1,318=110,671\angle -0,682^\circ[/math] кВ;
[math]\displaystyle {\phi}_{4′}=\angle -0,682^\circ-\angle 2^\circ=\angle -2,682^\circ[/math].


Расчет уравнительных перетоков мощности

Рисунок 6. Уравнительный переток мощности узла 1.
Рисунок 7. Уравнительный переток мощности узла 2.
Рисунок 8. Уравнительный переток мощности узла 4.

Между узлами потечет уравнительный переток мощности, обусловленный различием напряжений узлов [math]U_{1′} \text{ и } U_{1′′}, U_{2′} \text{ и } U_{2′′}, U_{4′} \text{ и } U_{4′′}[/math].

На рисунках 6, 7, 8 изображены эквивалентные схемы с уравнительными перетоками мощности.

Расчет эквивалентных сопротивлений:

[math] \displaystyle\underline Z_{1′1′′}=\underline Z_{A-1}+\underline Z_{B-3}+\frac{\underline Z_{1-3}\cdot(\underline Z_{2-3}+\underline Z_{1-2})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}{\underline Z_{1-3}\cdot(\underline Z_{2-3}+\underline Z_{1-2})+\underline Z_{1-3}\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})+(\underline Z_{2-3}+\underline Z_{1-2})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}[/math];


[math] \displaystyle \underline Z_{2-3}+\underline Z_{1-2}=2,4+j8,1+2,4+j8,1=4,8+j16,2\text{ Ом }[/math];
[math] \displaystyle\underline Z_{1′1′′}=4,8+j16,2+2,4+j8,1+\frac{(3,6+j12,15)\cdot(4,8+j16,2)\cdot(9,6+j32,4)}{(3,6+j12,15)\cdot(4,8+j16,2)+(3,6+j12,15)\cdot(9,6+j32,4)+(4,8+j16,2)\cdot(9,6+j32,4)}+2,4+j8,1[/math];
[math] \displaystyle\underline Z_{1′1′′}=8,894+j30,018\text{ Ом }[/math];


[math] \displaystyle\underline Z_{2′2′′}=\underline Z_{1-2}+\frac{\underline Z_{1-3}\cdot(\underline Z_{A-1}+\underline Z_{B-3})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}{\underline Z_{1-3}\cdot(\underline Z_{A-1}+\underline Z_{B-3})+\underline Z_{1-3}\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})+(\underline Z_{A-1}+\underline Z_{B-3})\cdot(\underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5})}+\underline Z_{2-3}[/math];


[math] \displaystyle \underline Z_{A-1}+\underline Z_{B-3}=4,8+j16,2+2,4+j8,1=7,2+j24,3\text{ Ом }[/math];
[math] \displaystyle \underline Z_{1-4}+\underline Z_{4-5}+\underline Z_{3-5}=4,8+j16,2+1,2+j4,05+3,6+j12,15=9,6+j32,4\text{ Ом }[/math];


[math] \displaystyle\underline Z_{2′2′′}=2,4+j8,1+\frac{(3,6+j12,15)\cdot(7,2+j24,3)\cdot(9,6+j32,4)}{(3,6+j12,15)\cdot(7,2+j24,3)+(3,6+j12,15)\cdot(9,6+j32,4)+(7,2+j24,3)\cdot(9,6+j32,4)}+2,4+j8,1[/math]
[math] \displaystyle\underline Z_{2′2′′}=6,72+j22,68\text{ Ом }[/math]
[math] \displaystyle\underline Z_{4′4′′}=\underline Z_{1-4}+\frac{\underline Z_{1-3}\cdot(\underline Z_{2-3}+\underline Z_{1-2})\cdot(\underline Z_{A-1}+\underline Z_{B-3})}{\underline Z_{1-3}\cdot(\underline Z_{2-3}+\underline Z_{1-2})+\underline Z_{1-3}\cdot(\underline Z_{A-1}+\underline Z_{B-3})+(\underline Z_{2-3}+\underline Z_{1-2})\cdot(\underline Z_{A-1}+\underline Z_{B-3})}+\underline Z_{3-5}+\underline Z_{4-5}[/math];


[math] \displaystyle \underline Z_{A-1}+\underline Z_{B-3}=4,8+j16,2+2,4+j8,1=7,2+j24,3\text{ Ом }[/math];
[math] \displaystyle\underline Z_{4′4′′}=4,8+j16,2+\frac{(3,6+j12,15)\cdot(4,8+j16,2)\cdot(7,2+j24,3)}{(3,6+j12,15)\cdot(4,8+j16,2)+(3,6+j12,15)\cdot(7,2+j24,3)+(4,8+j16,2)\cdot(7,2+j24,3)}+3,6+j12,15+1,2+j4,05[/math];
[math] \displaystyle\underline Z_{4′4′′}=11,2+j37,8\text{ Ом }[/math].


Расчет уравнительных перетоков мощности:

[math]\displaystyle \dot S_{ур1}= \frac{\dot U_{1′} + \dot U_{1′′}}{2}\cdot \frac{\hat U_{1′′}-\hat U_{1′}}{\hat Z_{1′1′′}}=\frac{111,544\angle -1,5^\circ+111,912 \angle -1,673^\circ}{2}\cdot \frac{111,912 \angle -1,673^\circ-111,544\angle -1,5^\circ}{8,894+j30,018}=12,56-j2,349\text{ МВА }[/math];
[math]\displaystyle \dot S_{ур2}= \frac{\dot U_{2′} + \dot U_{2′′}}{2}\cdot \frac{\hat U_{2′}-\hat U_{2′′}}{\hat Z_{2′2′′}}=\frac{113,732\angle -0,943^\circ+113,528 \angle -0,563^\circ}{2}\cdot \frac{113,732\angle -0,943^\circ-113,528 \angle -0,563^\circ}{6,72+j22,68}=-3,198+j1,973\text{ МВА }[/math];
[math]\displaystyle \dot S_{ур4}= \frac{\dot U_{4′} + \dot U_{4′′}}{2}\cdot \frac{\hat U_{4′}-\hat U_{4′′}}{\hat Z_{4′4′′}}=\frac{110,671\angle -2,682^\circ+110,487 \angle -2,316^\circ}{2}\cdot \frac{110,671\angle -2,682^\circ-110,487 \angle -2,316^\circ}{11,2+j37,8}=-1,752+j1,058\text{ МВА }[/math].

Данные для второй итерации

Потоки мощностей:

[math]\displaystyle \dot S_{1′}=\dot S_{A1}-\dot S_{ур1}=25,45+j16,633-(12,56-j2,349)=12,89+j18,982 \text{ МВА }[/math];
[math]\displaystyle \dot S_{1′′}=\dot S_{S1′′}+\dot S_{ур1}=14,55+j3,367+12,56-j2,349=27,11+j1,018 \text{ МВА }[/math];
[math]\displaystyle \dot S_{2′}=\dot S_{12}+\dot S_{ур2}=33,665+j15,453+(-3,198+j1,973)=30,467+j17,426 \text{ МВА }[/math];
[math]\displaystyle \dot S_{2′′}=\dot S_{23}-\dot S_{ур2}=46,335+j24,547-(-3,198+j1,973)=12,89+j18,982 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4′}=\dot S_{14}+\dot S_{ур4}=10,668+j6,024+(-1,752+j1,058)=8,916+j7,081 \text{ МВА }[/math];
[math]\displaystyle \dot S_{4′′}=\dot S_{45}-\dot S_{ур4}=19,332+j8,976-(-1,752+j1,058)=21,084+j7,919 \text{ МВА }[/math].

Напряжения:

[math]\displaystyle \dot{U}_{1}=111,714 \angle -1,586^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{2}=113,629 \angle -0,753^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{3}=110,801 \angle -1,934^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{4}=110,578 \angle -2,499^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{5}=111,02 \angle -1,995^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{1′}=111,544 \angle -1,5^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{1′′}=111,912 \angle -1,673^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{2′}=113,732 \angle -0,943^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{2′′}=113,528 \angle -0,563^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{4′}=110,671 \angle -2,682^\circ [/math] кВ;
[math]\displaystyle \dot{U}_{4′′}=110,487 \angle -2,316^\circ [/math] кВ.

Потери в шунтах:

[math]\displaystyle \dot{ΔS_{ш1′}} = \dot {|U_{1′}|}^{2}\cdot \frac {\hat Y_{A-1}}{2}={111,544}^{2}\cdot \frac {-j112,4}{2}\cdot 10^{-6}=-j0,699 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш1′′}} = \dot {|U_{1′′}|}^{2}\cdot\left( \frac {\hat Y_{1-2}}{2}+\frac {\hat Y_{1-3}}{2}+\frac {\hat Y_{1-4}}{2}\right)={111,912}^{2}\cdot \left( \frac {-j56,2}{2}+\frac {-j84,3}{2}+\frac {-j112,4}{2}\right)\cdot 10^{-6} = -j1,584 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш2′}} = \dot {|U_{2′}|}^{2}\cdot \frac {\hat Y_{1-2}}{2}={113,732}^{2}\cdot \frac {-j56,2}{2}\cdot 10^{-6}=-j0,363 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш2′′}} = \dot {|U_{2′′}|}^{2}\cdot \frac {\hat Y_{2-3}}{2}={113,528}^{2}\cdot \frac {-j56,2}{2}\cdot 10^{-6}=-j0,362 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш3}} = \dot {|U_{3}|}^{2}\cdot\left( \frac {\hat Y_{1-3}}{2}+\frac {\hat Y_{B-3}}{2}+\frac {\hat Y_{3-5}}{2}\frac {\hat Y_{2-3}}{2}\right)={110,801}^{2}\cdot \left( \frac {-j84,3}{2}+\frac {-j56,2}{2}+\frac {-j84,3}{2}+\frac {-j56,2}{2}\right)\cdot 10^{-6}=-j1,725 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш4′}} = \dot {|U_{4′}|}^{2}\cdot \frac {\hat Y_{1-4}}{2}={110,671}^{2}\cdot \frac {-j112,4}{2}\cdot 10^{-6}=-j0,688 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш4′′}} = \dot {|U_{4′′}|}^{2}\cdot \frac {\hat Y_{4-5}}{2}={110,487}^{2}\cdot \frac {-j28,1}{2}\cdot 10^{-6}=-j0,172 \text{ МВА } [/math];
[math]\displaystyle \dot{ΔS_{ш5}} = \dot {|U_{5}|}^{2}\cdot\left( \frac {\hat Y_{4-5}}{2}+\frac {\hat Y_{3-5}}{2}\right)={111,02}^{2}\cdot \left( \frac {-j28,1}{2}+\frac {-j84,3}{2}\right)\cdot 10^{-6}=-j0,693 \text{ МВА } [/math].

Файлы для скачивания

Файл:Двухстороннее питание.rar